Residential · Clermont, FL
Flake epoxy flooring is the go-to system for garages, patios, retail backrooms, and shop floors when you want traction, easy cleaning, and a consistent decorative look. Elite Epoxy Clermont has served Clermont since 2018, handling new installs and repairs with proper surface prep, broadcast flakes, and durable topcoats that hold up to Florida heat and rain.
Prep and base coat decide whether a flake floor lasts or peels. We start by testing the slab, checking for moisture vapor and weak concrete, then diamond-grind with HEPA dust control to open the pores and remove sealers, paint, and curing compounds. Cracks and spalls are routed and filled with epoxy gel or polyurea repair material, followed by a level skim where needed, then we apply a pigmented 100% solids epoxy base coat at a consistent mil thickness so the flakes lock in uniformly.
Clermont conditions mean we plan for humidity, afternoon storms, and hot slabs. We use fast-set products and schedule around dew point so the base coat and clear coat cure properly, then broadcast vinyl color flakes to rejection (full coverage) for a dense, even texture. After the base sets, we scrape and vacuum to remove loose chips, then finish with a clear polyaspartic or polyurethane topcoat for UV stability, chemical resistance, and easier mopping, with optional anti-slip aggregate for wet entries, pool-deck transitions, and covered lanais.
Customers choose us because we treat flake epoxy flooring like a system, not just paint with chips. You get straightforward guidance on color blends, flake size (typically 1/4 inch), and topcoat sheen, plus realistic expectations for tire pickup, hot-tire areas, and maintenance. We are licensed and insured, provide free written estimates, protect walls and door thresholds, and keep the jobsite clean with professional grinders, vacuums, and containment so your garage or business can get back to normal quickly.
At completion we do a walkthrough, confirm edges, drains, control joints, and transitions, and make sure the broadcast is even with no bald spots or rough ridges. You receive cure-time and return-to-service guidance (foot traffic versus vehicles), cleaning instructions that avoid harsh acids and soap buildup, and a maintenance plan for high-traffic areas. If you are calling for repair, we identify the root cause (moisture, contamination, coating failure, or impact damage) and blend new base, flake, and topcoat into the surrounding field for a clean, consistent finish.
It depends on the system and conditions. Many polyaspartic topcoats allow faster return to service than epoxy-only systems, but we will give you a written schedule for foot traffic and vehicle traffic based on cure time.
Hot-tire pickup is usually caused by poor prep, low-grade products, or coatings not designed for garages. We prioritize diamond grinding, proper primers, and durable topcoats to reduce that risk.
Yes. We route or open cracks as needed, fill with polyurea or epoxy repair materials, and patch spalls and pitting with epoxy mortar so the finished floor looks uniform and performs better.
High-gloss floors can be slick with water. We can add aluminum oxide or polymer grit to the topcoat, or use flake texture, to increase slip resistance while keeping the floor easy to clean.
Yes. We provide a free written estimate that lists the recommended system, surface prep approach, finish options, and project schedule.
Flake epoxy flooring is a broadcast flooring system built for real wear, not a quick roll-on coating. It combines a high-build epoxy base coat, decorative vinyl flakes, and a clear protective topcoat to create a surface that resists stains, improves traction, and cleans up fast. Elite Epoxy Clermont installs and repairs flake systems for garages, workshops, warehouses, break rooms, covered patios, and commercial service areas where durability and appearance both matter.
A quality flake epoxy flooring install starts with the concrete. If the slab is glossy, contaminated, or sealed, coatings can delaminate. That is why we mechanically profile the surface with diamond tooling, control dust with HEPA vacuums, and address defects before coating. We also look for moisture-related risks that cause bubbling or whitening, then recommend the right primer or mitigation approach when needed. Once the base coat is down, we broadcast flakes to rejection and back-roll the field so the chips sit evenly, then scrape and vacuum before the clear coat goes on.
For repairs, we do more than patch a spot. We trace peeling, chipping, or dark stains back to the cause, such as poor prep, oil contamination, or water intrusion, then rebuild the system so the fix holds. Color-matching flakes and blending the repair into surrounding areas helps the floor look intentional instead of patched. If you need a safer walking surface, we can tune texture with the right broadcast density and a traction additive in the clear coat.
If you are comparing quotes for flake epoxy flooring in Clermont, ask what prep method is included, what resin is used for the base coat (100% solids epoxy versus thin solvent blends), and what clear topcoat will protect the flakes from UV and chemicals. We will spell out those details in a free written estimate and walk you through options for color blends, sheen, and return-to-service timing so you can choose the right system for your space.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Clermont. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
