Residential · Clermont, FL
Metallic epoxy flooring is a high-build, flowing system that creates depth, movement, and a seamless surface that cleans fast. Elite Epoxy Clermont has served Clermont since 2018, installing and repairing metallic floors for showrooms, offices, lobbies, and high-end residential spaces where appearance matters.
Prep drives the final look, so we start with the slab. We diamond-grind with HEPA dust control, remove coatings and adhesives, and check for laitance, cracks, and weak concrete. Joints and cracks are routed, cleaned, and repaired with epoxy crack filler or polyurea, then we confirm flatness and profile (typically CSP 2-3) before priming. When moisture is elevated, we install a moisture-mitigating epoxy primer and broadcast sand to lock in mechanical bond for the metallic coat.
Central Florida humidity and temperature swings can change working time and how metallic pigments “open up,” so we control the pour and airflow to keep the pattern consistent. Metallic epoxy is applied as a pigmented base and metallic mid-coat, then manipulated with squeegees, rollers, and spiked shoes to create marbling, veining, and cloud effects without lap lines. We finish with a clear protective topcoat, typically a UV-stable urethane or polyaspartic, in satin or gloss. For slip resistance in entryways or wet areas, we add an aluminum oxide or polymer grit additive at a measured rate so it grips without looking like sandpaper.
Clermont customers choose us because our process is built around repeatable prep, clean edges, and predictable cure, not quick “one-coat” installs. You get a written scope that spells out surface prep, repair methods, coat thickness targets, topcoat type, and cure windows. Our crews are licensed and insured, and we show up with commercial grinders, calibrated mixing, and moisture testing to prevent common failures like fisheyes, bubbles, and hot-tire pickup. If your floor needs repair, we match color movement as closely as possible and blend into the field so patches do not telegraph.
Before we start, we review a sample board and agree on the metallic style, base color, and gloss level, then protect walls, doorways, and adjacent finishes. After installation, we do a final walkthrough covering sheen consistency, slip option, and care instructions, including what cleaners to use and what to avoid. You receive a free written estimate, clear scheduling, and guidance on return-to-service timing for foot traffic and furniture. If you need touch-ups later, we can re-topcoat and renew gloss without tearing out the entire floor when the system is still sound.
It depends on the system and conditions. Many polyaspartic topcoats allow faster return to service than epoxy-only systems, but we will give you a written schedule for foot traffic and vehicle traffic based on cure time.
Hot-tire pickup is usually caused by poor prep, low-grade products, or coatings not designed for garages. We prioritize diamond grinding, proper primers, and durable topcoats to reduce that risk.
Yes. We route or open cracks as needed, fill with polyurea or epoxy repair materials, and patch spalls and pitting with epoxy mortar so the finished floor looks uniform and performs better.
High-gloss floors can be slick with water. We can add aluminum oxide or polymer grit to the topcoat, or use flake texture, to increase slip resistance while keeping the floor easy to clean.
Yes. We provide a free written estimate that lists the recommended system, surface prep approach, finish options, and project schedule.
Metallic epoxy flooring is a multi-layer resin system that uses reflective pigments to create a 3D, marbled look over concrete. It is popular for retail, office, hospitality, and residential interiors because it is seamless, stain resistant, and easy to maintain. The key is proper surface prep, moisture control, and a clear topcoat that protects the artwork-like metallic layer from wear, scratches, and UV exposure.
A quality metallic epoxy floor starts with concrete evaluation and prep. We remove old sealers, paint, and contaminants, then mechanically profile the slab with diamond tooling instead of acid etching. Cracks, spalls, and joints are repaired so movement and defects do not print through the metallic layer. When moisture vapor emission is a risk, we use an epoxy moisture barrier primer and a broadcast layer to create bite for the decorative coats.
During installation, we manage mix ratios, pot life, and working time so the metallic pigments disperse evenly and the pattern stays intentional across the entire space. After the metallic coat cures, we protect it with a clear wear layer, commonly a polyurethane or polyaspartic depending on the room use and desired gloss. This topcoat is what resists scuffs, chemicals, and daily cleaning, and it can be renewed later without disturbing the metallic design.
If your current metallic epoxy flooring has scratches, dulling, peeling, or impact damage, repair usually comes down to fixing the cause, then blending the finish. We can isolate delamination, correct moisture or adhesion issues, patch damaged sections, and apply a new clear coat to restore depth and shine. For a clean, durable result, request a free written estimate and we will recommend the right system for your slab and how you use the space.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Clermont. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
